CRYSTAL PAINTS SOLVENT/OIL BASED UNDERCOATS

Solvent/Oil Based

ALL PURPOSE UNDERCOAT

Solvent Based

A heavy bodied turps based formula using a combination of alkyd resins and oils. Approximately 24 hours drying time depending on humidity and ventilation. Very good adhesion is obtainable from old surfaces. Can be overcoated with water based paints. Suitable for most surfaces.
For exterior bare timber at least one coat of timber primer is recommended. Depending on condition of timber coverage is 10-12 square metres per litre.
Application by brush, roller or spray.

TIMBER PRIMER

Linseed Oil Based

Linseed oil based primer for new and old timber.
Can be painted over with water or oil based paints.
Application by brush, roller, or spray
Depending on condition of timber coverage is  6-12 square metres per litre
Approximately 24 hours drying time depending on humidity and ventilation
Available in 500ml, 1,  2,  4, and 10 litre cans
Washes up in mineral turps
Does not contain  any  lead or mercury based products

RED OXIDE ZINC CHROMATE PRIMER

Turps Based

Specially formulated with anti corrosive properties for preventing rust on bare steel. Not to be used on aluminum or galvanized surfaces unless surface is broken. Steel must be cleaned, free  from oils, and all surface rust removed before application. This product can stop rust for up to five years without top coating and can be brushed,  rolled or sprayed. If spraying, thinning with turps may be necessary. Washes up in mineral turps. Do not use thinners or other solvents. Drying time is 2-6 hours depending on weather conditions. Coverage is 6-12 square metres per litre depending on surface and application method

GREY OXIDE ZINC CHROMATE PRIMER

Turps Based

Specially formulated with anti corrosive properties for preventing rust on bare steel. Not to be used on aluminum or galvanized surfaces unless surface is broken. Steel must be cleaned, free  from oils, and all surface rust removed before application. This product can stop rust for up to five years without top coating and can be brushed,  rolled or sprayed. If spraying, thinning with turps may be necessary. Washes up in mineral turps. Do not use thinners or other solvents. Drying time is 2-6 hours depending on weather conditions. Coverage is 6-12 square metres per litre depending on surface and application method
Mineral solvent based top coats are recommended.

To order paint please call 07 3341 3566.

All of Crystal Paints, paint is made in Australia and is 100% Australian owned.

CRYSTAL PAINTS

Address

5 Curban St, Underwood QLD 4119, Australia

Contact

(07) 3341 3566

Follow

©2018 Crystal Paints.